Fencing a vineyard or orchard? Why the F3020 fencing head is the smartest choice

When it comes to managing trellis systems and protecting crops, vineyard and orchard fencing isn’t just a side job — it’s a seasonal essential. From setting up wire supports to replacing broken lines, choosing the right tool for wire crimping can save time, reduce labor fatigue, and keep your infrastructure solid for seasons to come.

Enter the F3020 fencing kit: a smart, multifunctional solution that goes far beyond pruning.

Crimping in action: what makes it different

Unlike bulky fencing pliers or manual crimp tools, the F3020 with its crimping head attachment delivers consistent pressure, fast application, and cleaner results — all using the same power platform as your daily pruner.

How it works:

• Swap the pruning head for the crimping accessory

• Position the wire and activate the tool

• Achieve tight, durable crimps in seconds
  
  

This setup is especially useful in vineyards with long trellis lines and orchards where fencing may double as livestock control.

A cost-saving accessory that pays off past

Think of your tool budget as an investment — not a cost. The F3020’s fencing head attachment lets you skip buying a separate crimping tool while reducing job time dramatically.

Key benefits:

• One battery, multiple uses (cutting, crimping, tying)

• Minimal maintenance and a single charging system

• Designed for rugged field work and easy to carry
  
  

With less gear to maintain, fewer tools to transport, and faster wire tensioning, the F3020 fencing kit offers value season after season.

Replace your fence pliers once and for all

Old-school pliers are heavy, slow, and inconsistent — especially on tough tension wire. Switching to the best tool for wire crimping isn’t about going high-tech — it’s about working smarter.

Why growers switch:

• Better crimp integrity = fewer repairs mid-season
  
  

• Ergonomic design = less wrist and hand fatigue
  
  

• Electric consistency = professional results every time
  
  

The F3020 fencing head is equipped with a certified Strainrite® crimping insert, an industry-standard among vineyard and livestock fencing professionals. This ensures compatibility with premium crimp sleeves and delivers perfect compression every time — no slipping, no over-crushing.

Whether you're working on a new vineyard fence installation or making fast repairs in the orchard, INFACO’s F3020 fencing tool with Strainrite crimp technology is your new go-to companion.

How Much Time (and Money) Can You Save?

Let’s break it down. A traditional manual crimping setup in a vineyard often requires two people and takes 12–15 minutes per row (depending on wire type and tension needs).

With the F3020 fencing kit, solo users report:

• 2–3 minutes per row

• Over 70% time savings
  

• Less crew fatigue and reduced risk of injury
  
  

Over a 5-acre vineyard with standard 10-foot row spacing, that’s:

• Over 2,000 feet of fencing

• Approximately 5 hours saved per worker per week
  
  

Multiply that across the season, and you're saving dozens of crew hours, which translates directly into labor cost reduction.

Fencing with the F3020 – Frequently Asked Questions

Q: What kind of wire does the F3020 crimping head work with?
The F3020 crimping head is compatible with a wide range of agricultural wire types commonly used in vineyards, orchards, and livestock fencing. INFACO USA supplies Strainrite® crimp sleeves in three sizes, each adapted to specific wire gauges and applications:

• 2.5 mm sleeves: Designed for fencing wires between 1.6 and 2.5 mm, including standard tension wires and most vineyard trellis systems. This is the most universal size — perfect for installing or repairing general-purpose fencing and mesh wire setups.
  
  

• 3.15 mm sleeves: Best suited for 3.15 mm solid fence wires or 1.6 mm high-tensile barbed wire. This is the go-to size for orchard perimeter fencing or livestock fencing in mixed-use farms, where strength and durability are essential.
  
  

• 5 mm sleeves: Designed for heavy-duty barbed wire applications, such as livestock paddocks or high-security fencing zones.

Q: Can I switch between pruning and crimping easily?
Yes. Just detach the pruning head and attach the crimping accessory — no additional tools required. The battery and handle remain the same.

Q: How durable is the crimping attachment?
Built for intensive use, the crimping module is rated for multiple seasons with minimal maintenance. And like all INFACO tools, it’s fully serviceable.

Q: Can it be used in rainy conditions?
Absolutely. The IP54-rated build of the F3020 and accessories means it handles humidity and dust in the field. However, while the tool itself is designed for harsh environments, we recommend protecting the battery pack under a waterproof jacket or vest during prolonged exposure to rain or when working in heavy downpours. This simple precaution helps extend the battery’s life, maintain full autonomy, and avoid potential moisture-related issues.

Q: Is this a good tool for livestock fencing too?
Yes. Many mixed farms use the crimp head for quick sheep and goat fence repairs, making it even more versatile beyond the vineyard.

Ready to ditch your old fencing tools?

With the F3020 fencing kit, vineyard and orchard managers finally have a tool that matches the demands of modern farming. Speed, power, precision — in one electric platform.

Check by yourself, test it in action today!